RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
2-11
To Set the Symmetry
(1)
Press Ramp
Æ
Symm, to set the Symmetry.
The Symmetry shown on the screen is the default value when the instrument is
powered or the set value beforehand. When changing the function, if the current
value is valid for the new waveform, it will be used sequentially.
(2)
Input the desired Symmetry.
Use the keypad or the knob to input the desired value, choose the unit, and press the
corresponding button. The Generator will change the waveform immediately.
Figure 2-15 Setting the Symmetry
In the Graph Mode, the waveform is shown in Figure 2-16.
Figure 2-16 Waveform Parameter in the Graph Mode
Current Parameter:
Symmetry
