RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
2-5
To Set the Output Amplitude
(1)
Press Sine
Æ
Ampl/HiLev
Æ
Ampl, to set the amplitude.
The amplitude shown on the screen is the default value when the instrument is
powered or the set value beforehand. When changing the function, if the current
value is valid for the new waveform, it will be used sequentially. If you want to set the
waveform by high Level or Low Level, press Ampl/HiLev or Offset/Lolev again, switch
to HiLev or LoLev parameter (The current operation is displayed in inverse color).
(2)
Input the desired Amplitude
Use the keypad or the knob to input the desired value, choose the unit, and press the
corresponding button.
Figure 2-6 Setting the Amplitude
Current Parameter:
Amplitude
