RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
2-27
To Set Counter
Press Count , in the normal mode, the screen display the operation menu of the
counter, see figure
2-38. Press “
Freq
”, “
Period
”, “
DutyCyc
”, “
PWidth
” and “
NWidth
”,
the instrument will display measurement values of the frequency, period, duty cycle,
positive width and negative width. Press Setup to set the measurement parameters.
To set measurement parameters of the counter containing: AC or DC, sensitivity, Trig
Level, High frequency on or off. Different settings make different measurement
results.
Figure 2-38
Normal display interface of the counter
Figure 2-39 Operation menu
Table 2-16 Operation menu of the counter
Function
menu
Settings
Explanation
Freq
Display the frequency of the
signal to be measure
Period
Display the period of the signal
to be measure
DutyCyc
Display the duty cycle of the
signal to be measure
PWidth
Display the positive width of
the signal to be measure
NWidth
Display the negative width of
the signal to be measure
Setup
To set the measurement
parameters of the counter
(Coupling way, sensitivity, trig
level)
