RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
2-10
To Set Ramp Signals
Press Ramp button, in the Normal Mode, the operation menu will appear at the
bottom of the screen, see Figure 2-13. Set the Ramp parameters by using the
operation menu.
The parameters for Ramp waveforms are: Frequency/ Period, Amplitude/ High Level,
Offset/ Low Level and Symmetry. See Figure 2-14. In the operation menu, select
Symm, and the corresponding parameter will be displayed in inverse color for which
users can make a change.
Figure 2-13 Ramp Signal Parameter Setting Interface
Figure 2-14 Operation Menu
Table 2-3 Ramp Signal Operation Menu
Function
Menu
Settings Explanation
Frequency/
Period
Setting the signal’s frequency or period; the
current parameter will switch at a second press.
Amplitude/
High Level
Setting the signal’s Amplitude or High Level; the
current parameter will switch at a second press.
Offset/Low
Level
Setting the signal’s Offset or Low Level; the
current parameter will switch at a second press
Symmetry
Setting the Symmetry for Ramp Waveform
Term Explanation:
Symmetry:
The percentage that the Rising Period takes up in the whole Period.
Input Range:
0~100%
