RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
2-7
To Set Square Signals
Press Square button, in the Normal Mode, the operation menu will appear at the
bottom of the screen, see Figure 2-9. Set the Square parameters by using the
operation menu.
The parameters for Square waveforms are: Frequency/ Period, Amplitude/ High Level,
Offset/ Low Level and Duty Cycle. See Figure 2-10. In the operation menu, select
DtyCyc, and the corresponding parameter will be displayed in inverse color for which
users can make a change.
Figure 2-9 Square Signal Parameter Setting Interface
Figure 2-10 Operation Menu
Table 2-2 Square Signal Operation Menu
Function
Menu
Settings
Explanation
Frequency/
Period
Setting the signal’s frequency or period; the
current parameter will switch at a second press.
Amplitude/
High Level
Setting the signal’s Amplitude or High Level; the
current parameter will switch at a second press.
Offset/Low
Level
Setting the signal’s Offset or Low Level; the
current parameter will switch at a second press
Duty Cycle
Setting the Duty Cycle for Square Waveform
