RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
2-12
To Set Pulse Signals
Press Pulse button, in the Normal Mode, the operation menu will appear at the
bottom of the screen, see Figure 2-17. Set the Pulse parameters by using the
operation menu.
The parameters for Pulse waveforms are: Frequency/ Period, Amplitude/ High Level,
Offset/ Low Level Pulse Width and Duty Cycle. See Figure 2-18. In the operation
menu, select Width, and the corresponding parameter will be displayed in inverse
color for which users can make a change.
Figure 2-17 Pulse Signal Parameter Setting Interface
Figure 2-18 Operation Menu
Table 2-4 Pulse Signal Operation Menu
Term Explanation:
Pulse Width:
The time span between thresholds of 50% of the rising edge
amplitude to the next 50% of the falling edge amplitude.
Function
Menu
Settings Explanation
Frequency/
Period
Setting the signal’s frequency or period; the
current parameter will switch at a second press.
Amplitude/
High Level
Setting the signal’s Amplitude or High Level; the
current parameter will switch at a second press.
Offset/Low
Level
Setting the signal’s Offset or Low Level; the
current parameter will switch at a second press.
Width/
DtyCyc
Setting the Pulse Width or Duty Cycle for Pulse
Waveform.
