RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
4-2
The selected arbitrary waveform is Volatile.
Inform the user that the selected waveform is Volatile.
Are all settings Restore to factory defaults?
If user wants to reset the instrument to the default setting, the system will prompt
this message, to confirm the operation, in case of accidental mistake.
All settings are restored to factory defaults.
When all the settings of the instrument have been reset to the default state, this
message will prompt to inform the user.
Storing waveform, please wait...
Inform the user that the saving operation is in process.
Waveform has been stored, as required.
Save the waveform to the specific place according to the user’s request. Once the
waveform is saved, this message prompts.
Performing Self-Test, Please wait...
When the Self-Test is performing, this message will prompt to inform the user to wait,
since it takes time.
Self-Test Passed.
When the Self-Test is finished, the result will be reported to the user. If the Self-test
has been passed, this message will prompt.
The instrument now is UNSECURED.
Inform the user that the password is correct and the user can calibrate the
instrument now. The instrument is unsecured.
Instrument triggered.
The manual trigger mode is activated, and the expected burst or sweep will
generate.
Selected modulating arb is **
：
Inform the user of the information about the selected modulating waveform.
Calibration Count
＝
0, Reversion
＝
04040109
：
Inform the user of the Calibration time and the version. Before the instrument is
shipped, it has already been calibrated. When you power a new instrument, the
default calibration time is 0. The latest version can be reached at the company’s
website: http:// www.rigol.com.
