RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
2-6
To Set the DC Offset
(1)
Press Sine
Æ
Offset/LoLev
Æ
Offset, to set the offset.
The offset shown on the screen is the default value when the instrument is powered
or the set value beforehand. When changing the function, if the current value is valid
for the new waveform, it will be used sequentially.
(2)
Input the desired Offset
Use the keypad or the knob to input the desired value, choose the unit, and press the
corresponding button.
Figure 2-7 Setting the Offset
In the Graph Mode, the waveform is shown in Figure 2-8.
Figure 2-8 Waveform Parameter in the Graph Mode
Notes: the Setting of any waveform for DC Offset is the same as sine wave,
so we will not cover this topic hereon.
Current Parameter:
Offset
