Ricoh MP C305SPF, Field Service Manual, Page: 95 / 146

0
G3 Burst error threshold
0: Low 1: High
If there are more consecutive error lines in the
received page than the threshold, the machine
will send a negative response. The Low and High
threshold values depend on the sub-scan
resolution, and are as follows.
100 dpi 6(L) 12(H)
200 dpi 12(L) 24(H)
300 dpi 18(L) 36(H)
400 dpi 24(L) 48(H)
1
Acceptable total error line ratio
0: 5% 1: 10%
If the error line ratio for a page exceeds the
acceptable ratio, RTN will be sent to the other
end.
2
Treatment of pages received with errors
during G3 reception
0: Deleted from memory without printing
1: Printed
0: Pages received with errors are not printed.
3
Hang-up decision when a negative code
(RTN or PIN) is received during G3
immediate transmission
0: No hang-up, 1: Hang-up
0: The next page will be sent even if RTN or PIN
is received.
1: The machine will send DCN and hang up if it
receives RTN or PIN.
This bit is ignored for memory transmissions or if
ECM is being used.
4-7 Not used Do not change the settings.
Communication Switch 03 (SP No. 1-104-004)
No Function Comments
0-7
Maximum number of page
retransmissions in a G3 memory
transmission
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
Communication Switch 04 - Not used (do not change the settings)
Communication Switch 05 - Not used (do not change the settings)
Bit Switches
93