Ricoh MP C305SPF, Field Service Manual, Page: 109 / 146

G3 Switch 0D Not used (do not change the settings).
G3 Switch 0E (SP No. 1-105-015)
No Function Comments
0-7
Set CNG send time interval
Some machines on the receiving side may not be able to automatically switch the 3-second
CNG interval.
High order bit
3000-2250ms: 3000-50xNms
3000 – 50 x Nms 0F (3000 ms) <= N <= FF (2250 ms)
Low order bit
00-0E(3000-3700ms: 3000+50xNms
3000 – 50 x Nms 0F (3000 ms) <= N <= 0F (3700
ms)
G3 Switch 0F (SP No. 1-105-016)
No Function Comments
0
Alarm when an error occurred in
Phase C or later
0: Disabled
1: Enabled
If the customer wants to hear an alarm after each error
communication, change this bit to "1".
1
Alarm when the handset is off-
hook at the end of communication
0: Disabled
1: Enabled
If the customer wants to hear an alarm if the handset is
off-hook at the end of fax communication, change this
bit to "1".
2-3 Not used Do not change the settings.
4
Sidaa manual calibration setting
0: Off
1: On
1: manually calibrates for communication with a line,
whose current change occurs such as an optical fiber
line.
5-7 Not used Do not change the settings.
Bit Switches
107