Ricoh MP C305SPF, Field Service Manual, Page: 106 / 146

4-7
Modem types available for reception
The setting of these bits is used to inform the transmitting terminal of the available modem type
for the machine in receive mode.
If V.34 is not selected, V.8 protocol must be disabled manually.
Cross reference
V.8 protocol on/off - G3 switch 03, bit 2
Bit 7 Bit 6 Bit 5 Bit 4 Types
0 0 0 1 V.27ter
0 0 1 0 V.27ter, V.29
0 0 1 1 V.27ter, V.29, V.33
0 1 0 0 V.27ter, V.29, V.17/V.33
0 1 0 1 V.27ter, V.29, V.17/V33, V.34
Other settings - Not used
G3 Switch 07 (SP No. 1-105-008)
No Function Comments
0-1
PSTN cable equalizer
(tx mode: Internal) Use a higher setting if there is signal loss at
higher frequencies because of the length of
wire between the modem and the telephone
exchange.
Use the dedicated transmission parameters for
specific receivers.
Also, try using the cable equalizer if one or
more of the following symptoms occurs.
Communication error
Modem rate fallback occurs frequently.
• This setting is not effective in V.34
communications.
Bit 1 Bit 0 Setting
0 0 None
0 1 Low
1 0 Medium
1 1 High
4. Service Tables
104