Ricoh MP C305SPF, Field Service Manual, Page: 75 / 146

No Function Comments
0-5 Not used Do not change the settings.
6
Extended scanner page memory
after memory option is installed
0: Disabled
1: Enabled
0: After installing the memory expansion option, the
scanner page memory is extended to 4 MB from 2
MB.
1: If this bit is set to 1 after installing the memory
expansion option, the scanner page memory is
extended to 12 MB. But the SAF memory decreases
to 18 MB.
7
Special Original mode
0: Disabled
1: Enabled
1: If the customer frequently wishes to transmit a form
or letterhead which has a colored or printed
background, change this bit to "1". "Original 1" and
"Original 2" can be selected in addition to the "Text",
"Text/Photo" and "Photo" modes.
System Switch 1A (SP No. 1-101-027)
No Function Comments
0
to
7
LS RX memory capacity threshold
setting
00-FF (0-1020 Kbyte: Hex)
Sets the value to x4KB. When the amount of available
memory drops below this setting, RX documents are
printed to conserve memory.
Initial setting 0x80 (512 KB)
NOTE: If a customer wants available memory size
larger, decrease this threshold.
System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
System Switch 1D (SP No. 1-101-030)
No Function Comments
0
RTI/CSI/CPS code display
0: Enable
1: Disable
0: RTI, CSI, CPS codes are displayed on the top
line of the LCD panel during communication.
1: Codes are switched off (no display)
1-7 Not used Do not change these settings.
Bit Switches
73