Ricoh MP C305SPF, Field Service Manual, Page: 87 / 146

3-4
Maximum print width used in the
setup protocol
These bits are only effective when bit 7 of the printer
switch 01 is “1”.
Bit 4 Bit 3 Setting
0 0 Not used
0 1 A3
1 0 B4
1 1 A4
5-6 Not used Do not change the settings.
7
Received message width
restriction in the protocol signal to
the sender
0: Disabled
1: Enabled
0: The machine informs the transmitting machine of the
print width depending on the paper size available from
the paper feed stations.
Refer to the table on the next page for how the machine
chooses the paper width used in the setup protocol
(NSF/DIS).
1: The machine informs the transmitting machine of the
fixed paper width which is specified by bits 3 and 4
above.
Relationship between available paper sizes and printer width used in the setup protocol
Available Paper Size Printer width used in the Protocol (NSF/DIS)
A4 or 8.5" x 11" 297 mm width
B5 256 mm width
A5 or 8.5" x 5.5" 216 mm width
No paper available (Paper end) 216 mm width
Printer Switch 02 (SP No. 1-103-003)
No Function Comments
Bit Switches
85