Ricoh MP C305SPF, Field Service Manual, Page: 110 / 146

IP Fax Switches
IP Fax Switch 00 (SP No. 1-111-001)
No. Function Comments
0 Not used Do not change this setting.
1
IP Fax Transport
0: TCP, 1: UDP
Selects TCP or UDP protocol for IP-Fax
2
IP Fax single port selection
0: OFF, 1: ON (enable)
Selects single data port.
3
IP Fax double ports (single data port)
selection
0: OFF, 1: ON (enable)
Selects whether IP-Fax uses a double port.
4
IP Fax Gatekeeper
0: OFF, 1: ON (enable)
Enables/disables the gatekeeper for IP-Fax.
5
IP Fax T30 bit signal reverse
0: LSB first, 1: MSB first
Reverses the T30 bit signal.
6
IP Fax max bit rate setting
0: Not affected, 1: Affected
When "0" is selected, the max bit rate does not
affect the value of the DIS/DCS.
When "1" is selected, the max bit rate affects the
value of the DIS/DCS.
7
IP Fax received telephone number
confirmation
0: No confirmation
1: Confirmation
When "0" is selected, fax data is received without
checking the telephone number.
When "1" is selected, fax data is received only
when confirming that the telephone number from
the sender matches the registered telephone
number in this machine. If this confirmation fails,
the line is disconnected.
IP Fax Switch 01 (SP No. 1-111-002)
No. Function Comments
4. Service Tables
108