SERVICE MANUAL
Page A2-25
APPENDIX 2
9107
May/12
Page A2-25
Oct/11
APPENDIX 2
SERVICE MANUAL
283
ISO 9650
NOTE:
It is acceptable to wrap the crimps with several layers of
white (1”) PVC tape.
2.69 Check that the painter grommet or retaining block has not become
displaced.
2.70 Keeping all straps in place, insert the push rivets into the container handles,
(4 in total, 2 for each handle), (FIGURE A2-30).
2.71 Place ‘DO NOT CUT’ tape over the top of each strap.
2.72 Remove the vacuum hose.
2.73 Remove the rachet straps if used.
2.74 Fit the ID tubes into the space provided in the handles, (FIGURES A2-31 &
A2-32). Use self adhesive black webbing to secure both tubes in place.
2.75 This completes the packing sequence for the Flat Pack, Throw Over liferaft.
The container is now ready for labelling. Please refer to Section 3 of this
Appendix 2, for container labelling.
Insert push rivets
FIGURE A2-30
