Page 818
CHAPTER 8
May/12
9107
SERVICE MANUAL
Page 818
Oct/11
CHAPTER 8
283
SERVICE MANUAL
ISO 9650
4. Container preparation
4.1 Drain holes
4.1.1 If the container requires drain holes to be drilled or if the configuration
has changed, please refer to the following positions for the holes,
(a) For Flat Pack see (FIGURE 817A).
(b) For Side mounting see (FIGURE 817B).
NOTE:
Drain holes must be made at the lowest point of the
configuration.
4.1.2 Create 5 mm diameter holes in the container base or sides as
required and shown below.
Container drain holes
FIGURE 817
ER
ER
