SERVICE MANUAL
Page 805
CHAPTER 8
9107
May/12
Page 805
Feb/11
CHAPTER 8
283
SERVICE MANUAL
ISO 9650
2.1.9 Install the lighting system RL5.
External unit
2.1.10 This operation is best performed with the arch-tube deflated.
2.1.11 Open the Velcro fastener on the top patch, (FIGURE 803).
2.1.12 From outside the liferaft, pass the connector and all of the cable from
the External lamp unit through the open fastener into the hole on the
patch on the top of the liferaft (FIGURE 803).
2.1.13 Slide the External lamp unit into the patch (FIGURE 804a).
2.1.14 Close the Velcro fastener to secure the External lamp unit in position
(FIGURE 804b).
(a) External lamp unit partially fitted
(b) External lamp unit fully installed
External lamp installation, Velcro variant
FIGURE 804
Top patch assembly, Velcro variant
FIGURE 803
