SERVICE MANUAL
Page A2-15
APPENDIX 2
9107
May/12
Page A2-15
Oct/11
APPENDIX 2
SERVICE MANUAL
283
ISO 9650
2.35 Insert the paddles at the front of the liferaft. Tie them securely to the inner
lifeline, using 50 Lbs (22 Kgf) breaking thread.
2.36 Place the Emergency packs into the liferaft. Keep the valises as flat as
possible, (FIGURE A2-16).
2.36.1 Place Food and Water pack in first.
2.36.2 Place Equipment pack on top.
NOTE:
Do not place anything on top of the cylinder.
2.36.3 Using the straps on each valise, tie them to the inner lifeline. Use an
overhand knot. This will secure the packs to the liferaft.
2.37 Connect a suction hose to each of the two deflation points and fully deflate
the buoyancies. These are located at the rear door, 1 on each buoyancy.
2.38 Enter the liferaft by the rear door and connect the switch activator to the
internal light.
CAUTION:
6-8 PERSON ONLY: WRAP THE ARCH TUBE AROUND
THE INTERNAL LIGHT, (FIGURE A2-18).
2.39 Wrap the arch tube around the internal light and secure with 1 turn of 25 mm
(1”) tape, (FIGURE A1-18).This will prevent the tension line from interfering
with the lighting switch.
2.40 Place the remaining three desiccant bags along the front of the liferaft pack.
2.41 Open the liferaft fully out.
