SERVICE MANUAL
Page 1109
CHAPTER 11
9107
May/12
Page 1109
Feb/11
CHAPTER 11
283
SERVICE MANUAL
ISO 9650
3. GRP container assembly spares
NOTE:
The part numbers contained in this section are for
WHITE GRP containers. Equivalent GREY containers
are available on request.
The following sub-sections cover part numbers for the ordering of container
assemblies in the form of complete containers or, sub-assemblies, that is,
individual container halves (top or bottom) and the specific type and required
quantities of Strap and Crimp assembly for each individual container.
The container requirement is determined in this section by one, or all, of the
following criteria:
3.1 Launch method Throw Over.
3.2 Drop height, which determines the ‘weight’ of container. A drop height of up
to, but not exceeding 6 meters.
3.3 Emergency Pack option(s) used.
3.4 Raft size.
3.5 Customer preference.
The following sub-sections group the relevant part numbers for containers as
follows:
(3a) Throw Over containers
GRP containers
ABS containers
Valise
(3b) Common container spares
(3c) Container labelling
