R&S FSV-K7, Operating Manual, Page: 42 / 262

Analog Demodulation Option R&S FSV–K7
R&S
®
FSV-K7/K7S
42 Operating Manual 1176.7561.02 ─ 06
AF Center (AF Spectrum)
Opens an edit box to enter the center frequency within the AF spectrum.
Remote command:
[SENSe:]ADEMod<n>:AF:CENTer
on page 121
AF Start
Opens an edit box to define the start frequency within the AF spectrum.
Remote command:
[SENSe:]ADEMod<n>:AF:STARt
on page 123
AF Stop
Opens an edit box to define the stop frequency within the AF spectrum.
The maximum AF stop frequency corresponds to half the demodulation bandwidth.
Remote command:
[SENSe:]ADEMod<n>:AF:STOP
on page 124
2.2.3 Softkeys of the Span Menu – SPAN Key (Analog Demodulation)
The following table shows all softkeys available in the ""Span"" menu in ""Analog
Demodulation"" mode ([SPAN] key). It is possible that your instrument configuration
does not provide all softkeys. If a softkey is only available with a special option, model
or (measurement) mode, this information is delivered in the corresponding softkey
description.
Span Manual (RF Spectrum) ........................................................................................ 42
AF Span Manual (AF Spectrum) ................................................................................... 42
Demod BW ....................................................................................................................43
Full Span (RF Spectrum) .............................................................................................. 43
AF Full Span (AF Spectrum) ......................................................................................... 43
Span Manual (RF Spectrum)
Opens an edit dialog box to enter the frequency span. The center frequency is kept
constant. If the RF spectrum display is active, values between the sampling rate/1000
and the demodulation bandwidth are allowed.
Remote command:
[SENSe:]ADEMod:SPECtrum:SPAN:ZOOM
on page 142
AF Span Manual (AF Spectrum)
Opens an edit dialog box to enter the frequency range for the AF spectrum display. Val-
ues between the sampling rate/1000 and the demodulation bandwidth/2 are allowed.
Remote command:
[SENSe:]ADEMod<n>:AF:SPAN
on page 122
Softkeys of the Analog Demodulation option