R&S FSV-K7, Operating Manual, Page: 68 / 262

Analog Demodulation Option R&S FSV–K7
R&S
®
FSV-K7/K7S
68 Operating Manual 1176.7561.02 ─ 06
└ Stepsize Standard ...........................................................................................70
└ Stepsize Sweep Points ................................................................................... 70
Marker Zoom (span > 0) ................................................................................................71
Link Mkr1 and Delta1 .................................................................................................... 71
Link Time Marker ...........................................................................................................71
Link AF Spectrum Marker ............................................................................................. 71
Marker 1 / Marker 2 / Marker 3 / … Marker 16,/ Marker Norm/Delta
The "Marker X" softkey activates the corresponding marker and opens an edit dialog
box to enter a value for the marker to be set to. Pressing the softkey again deactivates
the selected marker.
If a marker value is changed using the rotary knob, the step size is defined via the
Stepsize Standard or Stepsize Sweep Points softkeys.
Marker 1 is always the reference marker for relative measurements. If activated, mark-
ers 2 to 16 are delta markers that refer to marker 1. These markers can be converted
into markers with absolute value display using the "Marker Norm/Delta" softkey. If
marker 1 is the active marker, pressing the "Marker Norm/Delta" softkey switches on
an additional delta marker.
Remote command:
CALCulate<n>:MARKer<m>[:STATe]
on page 104
CALCulate<n>:MARKer<m>:X
on page 105
CALCulate<n>:MARKer<m>:Y?
on page 107
CALCulate<n>:DELTamarker<m>[:STATe]
on page 174
CALCulate<n>:DELTamarker<m>:X
on page 175
CALCulate<n>:DELTamarker<m>:X:RELative?
on page 175
CALCulate<n>:DELTamarker<m>:Y?
on page 176
More Markers
Opens a sub-menu to select one of up to 16 available markers. See "Marker 1 / Marker
2 / Marker 3 / … Marker 16,/ Marker Norm/Delta" on page 68.
Marker to Trace
Opens an edit dialog box to enter the number of the trace on which the marker is to be
placed.
Remote command:
CALCulate<n>:MARKer<m>:TRACe
on page 105
Marker Wizard
Opens a configuration dialog for markers. The marker wizard allows you to configure
and activate up to 16 different markers in one dialog. The first 8 markers are displayed
on one tab, the last 8 markers on a second tab. For each marker, the following settings
are available:
Softkeys of the Analog Demodulation option