R&S FSV-K7, Operating Manual, Page: 113 / 262

Analog Demodulation Option R&S FSV–K7
R&S
®
FSV-K7/K7S
113 Operating Manual 1176.7561.02 ─ 06
Parameters:
<Distance> <numeric value>
*RST:
20 PCT = linear AM display, (50 kHz = linear FM
display), (2 rad = linear PM display), (10 dB = loga-
rithmic AF spectrum display)
Example: DISP:TRAC:Y:PDIV +10kHz
Sets the Y scale to 10 kHz per division.
Mode: ADEMOD
Manual operation: See "Dev per Division" on page 34
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel <ReferenceLevel>
This command defines the reference level.
With the reference level offset
≠
0, the value range of the reference level is modified by
the offset.
Suffix:
<n>
.
irrelevant.
<t> irrelevant
Parameters:
<ReferenceLevel> The unit is variable.
Range:
see datasheet
*RST: -10dBm
Example: DISP:TRAC:Y:RLEV -60dBm
Manual operation: See "Ref Level" on page 44
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel:OFFSet <Value>
This command defines a reference level offset.
Suffix:
<n>
.
irrelevant.
<t> irrelevant
Parameters:
<Value> Range: -200 to 200
*RST: 0
Default unit: dB
Example: DISP:TRAC:Y:RLEV:OFFS -10dB
Manual operation: See "Ref Level Offset" on page 48
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RPOSition <Position>
This command defines the position of the reference level on the display grid..
Remote Commands of the Analog Demodulation (R&S FSV–K7)