R&S FSV-K7, Operating Manual, Page: 106 / 262

Analog Demodulation Option R&S FSV–K7
R&S
®
FSV-K7/K7S
106 Operating Manual 1176.7561.02 ─ 06
CALCulate<n>:MARKer<m>:X:SLIMits:LEFT <Limit>
This command sets the left limit of the marker search range.
If the power measurement in zero span is active, this command limits the evaluation
range to the trace.
Note : The function is only available if the search limit for marker and delta marker is
switched on (see
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe]
).
Suffix:
<n>
.
Selects the measurement window.
<m> irrelevant
Parameters:
<Limit> The value range depends on the span or sweep time.
The unit is Hz for frequency domain measurements and s for
time domain measurements.
Range:
0 to MAX
*RST: left diagram border
Example: CALC:MARK:X:SLIM ON
Switches the search limit function on.
CALC:MARK:X:SLIM:LEFT 10MHz
Sets the left limit of the search range to 10 MHz.
Manual operation: See "Left Limit" on page 74
CALCulate<n>:MARKer<m>:X:SLIMits:RIGHT <Limit>
This command sets the right limit of the marker search range.
If the power measurement in zero span is active, this command limits the evaluation
range to the trace.
Note : The function is only available if the search limit for marker and delta marker is
switched on (
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe]
).
Suffix:
<n>
.
Selects the measurement window.
<m> irrelevant
Parameters:
<Limit> The value range depends on the span or sweep time.
The unit is Hz for frequency domain measurements and s for
time domain measurements.
Range:
0 to MAX
*RST: left diagram border
Example: CALC:MARK:X:SLIM ON
Switches the search limit function on.
CALC:MARK:X:SLIM:RIGH 20MHz
Sets the right limit of the search range to 20 MHz.
Remote Commands of the Analog Demodulation (R&S FSV–K7)