R&S FSV-K7 Operating Manual Download Page 195

Page: 195 / 262

FM Stereo Option R&S

FSV–K7S

R&S

FSV-K7/K7S

195

Operating Manual 1176.7561.02 ─ 06

Add ← Predefined ← Display Config ← Left

Opens an edit dialog box to enter a name for the current screen configuration. The
configuration is then stored and added to the list.

Apply ← Predefined ← Display Config ← Left

Applies the currently selected configuration from the list to the current display.

Remove ← Predefined ← Display Config ← Left

Removes the currently selected configuration from the list.

Restore ← Predefined ← Display Config ← Left

Restores the default display configuration. Existing configurations with the default
names are replaced.

Close ← Predefined ← Display Config ← Left

Closes the displays settings dialog box.

Instrument Functions FM Stereo (R&S

FSV–K7S)

Summary of Contents for FSV-K7







































































































































































































































































Search results

Summary of Contents for FSV-K7

Reviews:

R&S FSV-K7, Operating Manual, Page: 195 / 262

Search results

Summary of Contents for FSV-K7

Reviews: