R&S FSV-K7, Operating Manual, Page: 241 / 262

FM Stereo Option R&S FSV–K7S
R&S
®
FSV-K7/K7S
241 Operating Manual 1176.7561.02 ─ 06
[SENSe:]SFM:<ChannelType>:FILTer:LPASs:FREQuency <Level>
This command activates/deactivates the selected low pass filter for the specified chan-
nel type.
For details on the low pass filter refer to "Low Pass" on page 31.
Suffix:
<ChannelType>
.
LEFT | RIGHt | MPX | MONO | STEReo | RDS | PILot
Channel type for which the command is performed.
Parameters:
<Level> <numeric value>
*RST:
RST value
Example: SFM:LEFT:FILT:LPAS:FREQ 10
Mode: SFM
Manual operation: See "Low Pass" on page 31
[SENSe:]SFM:<ChannelType>:FILTer:LPASs:FREQuency[:ABSolute] <FilterType>
This command selects the absolute low pass filter type in the specified window. For
details on filters refer to
"Low Pass" on page 31.
For details about the demodulation bandwidth range refer to "Demod BW" on page 30.
Suffix:
<n>
.
1...4
window
Parameters:
<FilterType> 3kHz | 15kHz | 150kHz
*RST:
15kHz
Example: SFM:LEFT:FILT:LPAS:FREQ 150kHz
Selects the low pass filter for the demodulation bandwidth range
from 400 kHz to 16 MHz.
Mode: SFM
[SENSe:]SFM:<ChannelType>:FILTer:LPASs:FREQuency:RELative <FilterType>
This command selects the relative low pass filter type in the specified window. For
details on filters refer to
Low Pass softkey.
For details about the demodulation bandwidth range refer to "Demod BW" on page 30.
Suffix:
<n>
.
1...4
window
Remote Commands of the FM Stereo Option (R&S FSV–K7S)