manualshive.com logo in svg

R&S FSV-K7, Operating Manual, Page: 34 / 262

Share
Download
R&S FSV-K7 Operating Manual Download Page 34

Analog Demodulation Option R&S

 

FSV–K7

R&S

®

 FSV-K7/K7S

34

Operating Manual 1176.7561.02 ─ 06

For higher AF frequencies the demodulation bandwidth must be increased.

Remote command: 

[SENSe:]FILTer<n>:DEMPhasis[:STATe]

 

on page 150

[SENSe:]FILTer<n>:DEMPhasis:TCONstant

 

on page 151

SFM:

[SENSe:]SFM:<ChannelType>:FILTer:DEMPhasis:STATe

 

on page 239

[SENSe:]SFM:<ChannelType>:FILTer:DEMPhasis:TCONstant

 

on page 239

All AF Filter Off ← AF Filter ← AM

Disables all specified AF Filters.

Remote command: 

[SENSe:]FILTer<n>:AOFF

 

on page 148

AF Range ← AM

Opens a submenu to define the diagram scaling for AF displays.

Dev per Division ← AF Range ← AM

Opens an edit dialog box to set the modulation depth or the phase deviation (Analog
Demodulation only), or frequency deviation per division:

AM display:

0.0001 % to 1000 %

FM display:

1 Hz/div to 100 MHz/div

PM display:

0.0001 rad/div to 1000 rad/div

The softkey is not available if logarithmic display is set ( "Deviation Lin/Log" softkey).

Remote command: 

DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:PDIVision

 

on page 112

Reference Position ← AF Range ← AM

Determines the position of the reference line for the modulation depth or the phase
deviation (Analog Demodulation only) or frequency deviation on the y-axis of the dia-
gram. By default, this line is set to 0.

The position is entered as a percentage of the diagram height with 100 % correspond-
ing to the upper diagram border. The default setting is 50 % (diagram center) for the
display of the AM, FM, or PM signal, and 100 % (upper diagram border) for the AF
spectrum display of the AM, FM, or PM signal.

Remote command: 

DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RPOSition

 

on page 113

Reference Value ← AF Range ← AM

Determines the modulation depth or the phase deviation (Analog Demodulation only)
or the frequency deviation at the reference line of the y-axis. The reference value is set
separately for each display of the AM, FM, and PM signal and the AF spectrum of the
AM, FM, and PM signal.

●

AM/FM/PM signal display
The trace display takes individual frequency/phase offsets into account (in contrast,
the 

AF Coupling AC/DC

 softkey permits automatic correction by the average fre-

Softkeys of the Analog Demodulation option

Summary of Contents for FSV-K7







































































































































































































































































Reviews:

No comments