Analog Demodulation Option R&S
FSV–K7
R&S
®
FSV-K7/K7S
16
Operating Manual 1176.7561.02 ─ 06
offset of the measurement time from the beginning of the capture buffer. The results,
which are based on the measurement time, are recalculated automatically based on
the new data.
2.1.5
AF Trigger
The analog demodulation option allows triggering to the demodulated signal. The dis-
play is stable if a minimum of five modulation periods are within the recording time.
Triggering is always DC-coupled. Therefore triggering is possible directly to the point
where a specific carrier level, phase or frequency is exceeded or not attained.
2.1.6
Configuring Traces
1. To open the trace wizard, press the TRACE key and then the "Trace Wizard" soft-
Tip:
Context-sensitive menus for traces. Traces have context-sensitive menus. If
you right-click on a trace in the display or a trace setting in the information channel
bar (or touch it for about 1 second), a menu is displayed which corresponds to the
softkey functions available for traces. This is useful, for example, when the softkey
display is hidden.
If a menu entry contains an arrow to the right of it, a submenu is available for that
entry.
To close the menu, press the ESC key or click in the display outside of the menu.
2. For each trace you can define the following settings:
Instrument Functions Analog Demodulation