Analog Demodulation Option R&S
FSV–K7
R&S
®
FSV-K7/K7S
165
Operating Manual 1176.7561.02 ─ 06
Example:
TRIG:LEV:AM:REL -20 %
Sets the AM trigger threshold to -20 %
Mode:
ADEMOD
TRIGger<n>[:SEQuence]:LEVel:BBPower
<Level>
This command sets the level of the baseband power trigger source (for digital input via
the R&S Digital I/Q Interface, R&S
FSV-B17).
Suffix:
<n>
.
irrelevant
Parameters:
<Level>
Range:
-50 dBm to +20 dBm
*RST:
-20 DBM
Example:
TRIG:LEV:BB -30DBM
Mode:
All
Manual operation:
See
TRIGger<n>[:SEQuence]:LEVel:FM
<Level>
The command sets the level when FM-modulated signals are used as trigger source.
For triggering with AF, AM, AMRelative, FM, and PM trigger sources to be successful,
the measurement time must cover at least 5 periods of the audio signal.
Suffix:
n
.
irrelevant
Parameters:
<Level>
Range:
-10 to +10
*RST:
0 Hz
Default unit: MHz
Example:
TRIG:LEV:FM 10 kHz
Sets the FM trigger threshold to 10 kHz
Mode:
ADEMOD
TRIGger<n>[:SEQuence]:LEVel:IFPower
<TriggerLevel>
This command defines the power level at the third intermediate frequency that must be
exceeded to cause a trigger event. Note that any RF attenuation or preamplification is
considered when the trigger level is analyzed. If defined, a reference level offset is also
considered.
Suffix:
<n>
.
irrelevant
Parameters:
<TriggerLevel>
*RST:
-20 dBm
Remote Commands of the Analog Demodulation (R&S
FSV–K7)