R&S FSV-K7, Operating Manual, Page: 107 / 262

Analog Demodulation Option R&S FSV–K7
R&S
®
FSV-K7/K7S
107 Operating Manual 1176.7561.02 ─ 06
Manual operation: See "Right Limit" on page 75
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe] <State>
This command turns marker search limits on and off.
If the power measurement in zero span is active, this command limits the evaluation
range on the trace.
Suffix:
<n>
.
Selects the measurement window.
<m> marker
Parameters:
<State> ON | OFF
*RST:
OFF
Example: CALC:MARK:X:SLIM ON
Switches on search limitation.
CALCulate<n>:MARKer<m>:X:SSIZe <StepSize>
This command defines the step size of the rotary knob for marker or delta marker value
changes. It only takes effect in manual operation.
The marker step size is unavailable for statistical measurements.
Suffix:
<n>
.
irrelevant
<m> irrelevant
Parameters:
<StepSize> STANdard
step size corresponds to space between two pixels
POINts
step size corresponds to space between two measured values
(number of measured values is defined via the
[SENSe<n>:]SWEep:POINts
command, see
[SENSe:
]SWEep:POINts
on page 157)
*RST: POINts
Example: CALC:MARK:X:SSIZ STAN
Sets the measured value step size.
Manual operation: See "Stepsize Standard" on page 70
See "Stepsize Sweep Points" on page 70
CALCulate<n>:MARKer<m>:Y?
This command queries the measured value of a marker.
Remote Commands of the Analog Demodulation (R&S FSV–K7)