R&S FSV-K7, Operating Manual

Page: 44 / 262

Analog Demodulation Option R&S FSV–K7
R&S
®
FSV-K7/K7S
44 Operating Manual 1176.7561.02 ─ 06
RF Atten Auto/Mech Att Auto ........................................................................................ 47
El Atten On/Off .............................................................................................................. 47
El Atten Mode (Auto/Man) .............................................................................................47
Ref Level Offset .............................................................................................................48
Ref Level Position ......................................................................................................... 48
Grid Abs/Rel .................................................................................................................48
Input (AC/DC) ................................................................................................................48
Input 50 Ω/75 Ω ............................................................................................................49
Ref Level
Opens an edit dialog box to enter the reference level in the current unit (dBm, dBµV,
etc).
The reference level is the maximum value the AD converter can handle without distor-
tion of the measured value. Signal levels above this value will not be measured cor-
rectly, which is indicated by the "IFOVL" status display.
Remote command:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel
on page 113
AF Range
Only available for AM/FM/PM measurements (see Chapter 2.1.10, "Measurement
Result Display" , on page 20).
For details refer to the "AF Range" softkey of the main menu (see "AF Range"
on page 34).
Range
Only available for RF measurements (see Chapter 2.1.10, "Measurement Result Dis-
play" , on page 20).
Opens a submenu to define the level display range.
Range Log 100 dB ← Range
Sets the level display range to 100 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG
, see
DISPlay[:WINDow<n>]:TRACe<t>:Y:
SPACing
on page 114
Display range:
DISP:WIND:TRAC:Y 100DB
, see
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
on page 111
Range Log 50 dB ← Range
Sets the level display range to 50 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG
, see
DISPlay[:WINDow<n>]:TRACe<t>:Y:
SPACing
on page 114
Display range:
DISP:WIND:TRAC:Y 50DB
, see
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
on page 111
Softkeys of the Analog Demodulation option