Analog Demodulation Option R&S
FSV–K7
R&S
®
FSV-K7/K7S
123
Operating Manual 1176.7561.02 ─ 06
Example:
ADEM ON
, see
Switches on the analog demodulator
CALC:FEED 'XTIM:FM:AFSP'
, see
on page 90
Switches on AF spectrum result display of FM
ADEM:BAND 5 MHz
, see
Sets the measurement bandwidth
ADEM:AF:CENT 500kHz
, see
ADEM:AF:SPAN 200 kHz
Sets the AF span to 200 kHz
Mode:
ADEMOD
Manual operation:
See
"AF Span Manual (AF Spectrum)"
[SENSe:]ADEMod<n>:AF:SPAN:FULL
This command sets the maximum span for AF spectrum result display.
The maximum span corresponds to half the measurement bandwidth of analog demod-
ulation (
[SENSe:]ADEMod:BANDwidth|BWIDth:DEModulation
Suffix:
<n>
.
1...4
irrelevant
Example:
ADEM ON
, see
Switches on the analog demodulator
CALC:FEED 'XTIM:FM:AFSP'
, see
on page 90
Switches on AF spectrum result display of FM
ADEM:BAND 5 MHz
, see
Sets the measurement bandwidth to 5 MHz
ADEM:AF:SPAN:FULL
Sets the AF span to 2.5 MHz
Mode:
ADEMOD
Manual operation:
See
[SENSe:]ADEMod<n>:AF:STARt
<Frequency>
This command sets the start frequency for AF spectrum result display.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Frequency>
*RST:
0 MHz
Remote Commands of the Analog Demodulation (R&S
FSV–K7)