R&S FSV-K7 Operating Manual Download Page 121

Page: 121 / 262

Analog Demodulation Option R&S

FSV–K7

R&S

FSV-K7/K7S

121

Operating Manual 1176.7561.02 ─ 06

[SENSe:]ADEMod:CAPTure[:MODE]

<Mode>

This command defines how the size of the the capture buffer is defined for analog
demodulation.

Parameters:

<Mode>

AUTO

The capture buffer size is identical to the defined measurement
time (see

[SENSe:]ADEMod:MTIMe

MANual

The size of the capture buffer is defined manually using the

[SENSe:]ADEMod:CAPTure:TIME

command.

*RST:

AUTO

Example:

ADEM:CAPT MAN

Activates the manual capture buffer processing mode.

Mode:

ADEMOD

Manual operation:

See

"Capture Mode"

on page 57

[SENSe:]ADEMod[:STATe]

<State>

This command activates the analog demodulator of the instrument. The instrument will
be set to zero span at the current center frequency.

Parameters:

<State>

ON | OFF
*RST:

OFF

Example:

ADEM ON

Switches the analog demodulator on.

Mode:

ADEMOD

[SENSe:]ADEMod<n>:AF:CENTer

This command sets the center frequency for AF spectrum result display.

Suffix:

<n>

1...4
irrelevant

Parameters:

*RST:

1.25 MHz

Remote Commands of the Analog Demodulation (R&S

FSV–K7)

Summary of Contents for FSV-K7







































































































































































































































































Search results

Summary of Contents for FSV-K7

Reviews:

R&S FSV-K7, Operating Manual, Page: 121 / 262

Search results

Summary of Contents for FSV-K7

Reviews: