133
ESPLXD-ET Controller
Reinstall the ET Manager Cartridge
Reinstall the ET Manager Cartridge in the back of the controller front
panel.
A
Open the controller outer cabinet door and inner front panel. See
Section H, Access Controller Cabinet for more details.
B
Press down on the top-latch of the PBC-LXD cartridge and swing
it out from the back of the controller front panel.
1
2
C
Disconnect the PBC-LXD cartridge ribbon cable from the knife-
edge connector located at the top-left corner inside the cartridge
bay of the controller front panel.
3
D
Reinstall the ET Manager Cartridge. See Section H, Connect the ET
Manager Cartridge for instructions.
b
b
NOTE
: All previously programmed ET Manager settings are
retained, no reprogramming is required.
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 133
7/16/2012 3:48:43 PM
