29
ESPLXD-ET Controller
Set Up Custom Flow Sensor
b
g
Turn the controller dial to Setup Wizards.
A
The Setup Wizards screen appears. Press the Down Arrow button
to select Flow Sensors; then press Next.
B
The Flow Sensor Setup screen appears. Press the + and – buttons
to enter the desired flow sensor number; then press Next.
1
2
C
Press the + and – buttons to enter the decoder address, pressing
Next and Back to navigate between the number setting fields;
then press Next.
b
b
NOTE:
An alarm will show if a duplicate sensor decoder address
is entered for more than one flow sensor. See Section A, Alarm
Conditions for more details.
D
Press the + and – buttons to select Custom; then press Next.
3
4
E
Press the + and – buttons to set the flow sensor K Factor, pressing
Next and Back to navigate between the number setting fields;
then press Next.
F
Press the + and – buttons to set the flow sensor Offset, pressing
Next and Back to navigate between the number setting fields;
then press Next.
5
6
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 29
7/16/2012 3:48:11 PM
