Rain Bird ESPLXD-ET Installation, Programming & Operation Manual Download Page 99

Page: 99 / 224

ESPLXD-ET Controller

Weather Information

View the latest weather information received from the local
weather station.

View the latest detailed weather information received by the ET
Manager Cartridge from the most recent weather signal.

Turn the controller dial to ETM

/IQ

(or ETM

/IQ

/PBC

)

Settings; then press

Menu

The ET Manager screen appears. Press the

button to select Logs.

The Logs screen appears. Press the

button to select Weather

Information.

The Weather Information screen appears. Press

More

to see more

details

The Rain screen appears. Press

Next

to cycle through the Rain,

Temperature, Wind and Humidity weather categories

NOTE:

Values displayed as being “Last Hour” are updated each

time a weather signal is received. Values displayed as “High” and
“Low” are the high and low values since 12:00 AM that day.

ESPLXD-ET user-manual (670504-01) artwork_120716.indb 91

7/16/2012 3:48:30 PM

Summary of Contents for ESPLXD-ET

































































































































































































































Search results

Summary of Contents for ESPLXD-ET

Reviews:

Related manuals for ESPLXD-ET

Brands by name

Popular brands

Rain Bird ESPLXD-ET, Installation, Programming & Operation Manual

Search results

Summary of Contents for ESPLXD-ET

Reviews:

Related manuals for ESPLXD-ET

Brands by name

Popular brands