181
ESPLXD-ET Controller
Section H - Installation
Install the Controller
This section explains how to mount the ESPLXD-ET controller on a wall
(or mounting surface) and connect the wiring.
b
b
NOTE:
An optional metal cabinet (LXMM) and pedestal
(LXMMPED) are also available for the ESPLXD-ET controller. If you
intend to purchase those options then follow the installation
instructions included with those items and proceed to the Install
Modules section below.
b
c
WARNING:
This controller must be installed in compliance with
local electrical codes.
Installation Checklist
When installing the ESPLXD-ET controller for the first time, it is
recommended that you complete the following steps in order.
For your convenience a check-off box is provided for each step.
1
1
Check box contents ........................................................................Page 182
1
1
Select a location ..............................................................................Page 183
1
1
Gather installation tools ...............................................................Page 183
1
1
Access controller cabinet .............................................................Page 184
1
1
Mount ETC Receiver/Antenna ....................................................Page 185
1
1
Mount the controller .....................................................................Page 186
1
1
Install LXD module .........................................................................Page 187
1
1
Install expansion module(s) ........................................................Page 188
1
1
Connect field wiring.......................................................................Page 188
1
1
Connect source power ..................................................................Page 190
1
1
Complete controller installation ................................................Page 192
1
1
Connect ETC Manager cartridge ...............................................Page 193
1
1
Install local rain gauge (optional) .............................................Page 196
1
1
Connect decoders to field wiring ..............................................Page 197
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 181
7/16/2012 3:48:57 PM
