170
ESPLXD-ET Controller
Restore Defaults
Restore the ESPLXD-ET controller’s factory default settings.
b
g
Turn the controller dial to Clear Programs.
A
The Clear Programs screen appears. Press the Down Arrow button
to select Restore Defaults; then press Next.
B
A confirmation screen appears. To Restore Factory Defaults, press
and hold down the Yes button for four seconds. If you’re not sure,
press No.
1
2
C
A confirmation screen appears.
3
b
d
CAUTION:
Be very careful about using the Restore Defaults
option as all previous settings, including decoder addresses, will
be permanently cleared from system memory. Consider using the
Clear All Programs option instead so that your decoder addresses
will not be erased. Restore Defaults will NOT affect the ET Manager
Cartridge settings.
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 170
7/16/2012 3:48:54 PM
