167
ESPLXD-ET Controller
A
The Smart Module Status screen appears. Use the Down Arrow to
select Station Module(s); then press Next.
B
The LXD Station Modules screen appears showing all recognized
modules. Press Back to return to the previous screen or press Next
to review flow and Weather Sensors.
1
2
C
Pressing Next displays the number of supported flow and weather
sensors.
3
b
b
NOTE:
If the controller does not recognize an installed module,
carefully remove it and review the installation instructions in
Section H of this manual. Then re-install the module and repeat
this process.
Section G - Auxiliary Operation
Module Status
Confirm that your ESPLXD-ET controller recognizes installed
Station Modules.
The standard ESP-LXD-M50 module will use two of the four available
slots. You can also expand station capacity by 75-150 stations by
installing one or two ESP-LXD-SM75 Station Modules.
Smart Module Status
Check Station Module(s)
b
g
Turn the controller dial to Module Status.
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 167
7/16/2012 3:48:53 PM
