20
ESPLXD-ET Controller
Program Select Switch
Always begin programming by setting the Program Select
switch to the desired program.
Four independent Programs, A, B, C and D are available in the
ESPLXD-ET controller. Multiple programs allow you to set watering
schedules to meet different requirements for plant materials,
soils, slopes, and shady or sunny areas. Programs can operate
simultaneously with the only limitation being the number of
stations you program to run simultaneously.
Select Program
On the controller front panel, slide the Program Select switch
under the A, B, C, or D, then begin programming.
Program
Select
Switch
b
b
NOTE:
When programming the controller, any program-
specific information you enter, such as start times or watering
days, will affect only the selected program.
Setup Wizards
Setup Wizards take you through each step for setting up your
hardware in the ESPLXD-ET controller.
It’s most effective to use the Setup Wizards in the order they appear
on the screen: Valve Types, Master Valves, Weather Sensors (if present),
Station Setup, and finally Flow Sensors (if present).
Valve Types Setup
The Valve Type Setup Wizard tells the ESPLXD-ET controller what
types of valves are used by your irrigation system.
Up to five different valve types are supported by ESPLXD-ET, set up as
V1, V2, V3, V4, and V5.
b
b
NOTE:
It’s not necessary to set up additional valve types if you’re
only using one or two types of valves at your job site.
b
g
Turn the controller dial to Setup Wizards.
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 20
7/16/2012 3:48:08 PM
