79
ESPLXD-ET Controller
Set SimulStations
TM
for Controller
b
b
NOTE:
The LXD SimulStations settings will supersede program-
level settings. For example, if the LXD setting is 2 but three
programs have a maximum setting of 4, then only 2 stations will
be allowed to run simultaneously.
b
g
Turn the controller dial to Station Settings.
A
The Station Settings screen appears. Press the Down Arrow button
to select SimulStations; then press Next.
B
The Station Settings screen appears. Press the Down Arrow button
to select LXD SimulStations selected; then press Next.
1
2
C
The ESPLXD-ET Maximum Number of SimulStations screen
appears. Press the + and – buttons to set the maximum number of
irrigation stations (from 1 to 8) that can operate simultaneously;
then press Next.
D
Press the + and – buttons to set the maximum number of non-
irrigation stations (from 1 to 4).
3
4
b
b
NOTE:
The Non-Irrigation SimulStations setting is used to
configure the maximum number of Non-Irrigation stations
that can operate simultaneously and allows you to balance the
number of Irrigation and Non-Irrigation stations that can operate
simultaneously. Also note that when SimulStations are set to a
maximum of 8, if a Normally Closed Master Valve has to be held
open for irrigation to occur, it will limit the maximum number of
SimulStations to 7.
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 79
7/16/2012 3:48:26 PM