75
ESPLXD-ET Controller
Cyclical Days
b
g
Turn the controller dial to Watering Cycles.
A
The Watering Cycle screen appears. Press the Down Arrow button
to select Cyclical Days; then press Next.
b
b
NOTE:
If the desired program is not selected, use the Program
Select switch to change it. See Section B, Program Select Switch
for more details.
B
The Day Cycle screen appears. Press the + and – buttons to set the
watering day cycle (from 1 to 30 days). For example, set to 03 if
you want to water every third day; then press Next.
1
2
C
Press the + and – buttons to set the first date for the Watering
Cycle to begin; then press Next.
b
l
Press and HOLD buttons to accelerate settings for dates.
D
The Watering Day Cycle screen appears. Press the Yes button to
allow irrigation to start on a given day of the week or else press No
to prevent irrigation from starting.
3
4
E
Press the Next and Back buttons to navigate through the days of
the week and repeat the selection process as desired.
5
b
e
Change the Program Select switch and repeat this process to set
Cyclical Watering for other programs as desired.
b
b
NOTE:
Watering day selections carry over to Watering Days dial
positions and vice-versa. See Section B, Select Days to Water for
more details.
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 75
7/16/2012 3:48:25 PM
