201
ESPLXD-ET Controller
C
To enable the weather sensor: on the controller front panel, slide
the Weather Sensors switch to Active.
3
b
b
NOTE:
Ensure that the configuration for your controller and
irrigation programs are set up correctly for your sensor. For
example, if one of your programs is set up to manage your
landscape lighting you may want to ensure that its stations ignore
input from a local rain sensor. See Section B, Weather Sensors
Setup for more details.
b
b
NOTE:
The Weather Sensors switch activates or bypasses all
installed weather sensors on your system.
Verifying Field Installation
Once some or all field decoders have been installed and programmed
into the ESPLXD-ET controller you can check the electrical portion
of the installation even if water is not available to test sprinklers. See
Section C, Run a Line Survey for more details.
If water is available and you would like to test some or all of your
sprinklers, the easiest way to do so is by using the Manual Watering
features of the controller. See Section G, Manual Watering for more
details.
ESPLXD-ET user-manual (670504-01) artwork_120716.indb 201
7/16/2012 3:49:05 PM
