RADVision SCOPIA 400, User Manual

Page: 200 / 208

190 SCOPIA 400/1000 Gateway User Guide
Launching the Utility
L
AUNCHING THE
U
TILITY
This section describes how to install and launch the
RADVISION
Software
Upgrade Utility.
Procedure
1
Download the UpgradeUtility.exe file from the
RADVISION
Utilities and Documentation CD-ROM.
2
Double click the UpgradeUtility.exe file to run the Software
Upgrade Utility.
The upgrade files are extracted and the Upgrade Utility dialog
box appears.
U
PGRADING
S
OFTWARE
This section describes how to use the Software Upgrade Utility to upgrade
RADVISION
software installed on
RADVISION
devices.
Procedure
1
In the General Information section of the Upgrade Utility
dialog box, enter the IP address of the device you want to
upgrade.
2
In the Login Information section, enter the administrator user
name and password for the target device, as configured in the
device network configuration settings.
3
(Optional) Modify the read and write community settings for
the target device as follows:
Click Customize SNMP Settings .
The Customize SNMP Settings dialog box displays.
Enter the required read community and write
community values.
The default read and write community settings are RVGET2
and RVSET2 respectively.
Note We recommend that you modify the default settings for security
purposes.