RADVision SCOPIA 400, User Manual

Page: 164 / 208

154 SCOPIA 400/1000 Gateway User Guide
Saving Configuration Settings
You must use the Export button on the toolbar to save the configuration settings
to a file. The Export button appears only when Gateway section settings are
activated. When you save a configuration file, the current Board section settings
are saved in the file. If you want to change these settings for export, click Upload
on the toolbar to save these settings to configuration memory prior to saving the
configuration file.
Procedure
1 In the Gateway interface, on the sidebar, click Board .
2 Make sure that the settings in the Basics , Addressing , Web and Users
tabs are correct.
Note
Date parameters are not saved to the configuration file.
3 Click Upload to save these settings.
4 On the sidebar, click Gateway .
5 Make sure that the settings on the Status, Settings, PRI or Serial Ports,
Calls, Event Log and Statistics tabs are correct.
6 Click Upload to save these settings.
7 On the toolbar, click Export .
Note
A dialog box appears indicating that you are navigating away from the
page without saving the changes. Select the option to continue.
The File Download dialog box appears.
8 Save the configuration settings file to your chosen location. The file
extension
.ini is automatically appended to the file name.