RADVision SCOPIA 400, User Manual

Page: 88 / 208

78 SCOPIA 400/1000 Gateway User Guide
Configuring SCOPIA 400 Chassis Parameters
Table 3-3 System Elements
Element Description
Information section This section provides the following information about the
SCOPIA chassis hardware:
Serial number— Displays the serial number of the
chassis.
Part number— Displays the part number of the
chassis.
System configuration— Identifies the hardware
configuration the chassis uses.
Temperature threshold In this section, you can set the following temperature values
that the chassis uses to trigger changes in the ambient
temperature status:
Low— Enter the temperature value at which the
Gateway module turns off the chassis temperature
alarm. The value is measured in Celsius.
High— Enter the temperature value above which the
Gateway module turns on the chassis temperature
alarm. The value is measured in Celsius.
Status section These LEDs provide information about chassis operation.
Power —This LED lights green for normal
operation. It lights red when one power supply fails.
Alarm —This LED lights green for normal
operation. It lights red when a system failure occurs.
Fans —This LED lights green for normal operation.
It lights red when one or more fans fail. A message
then appears indicating which fan has failed.
Temperature —This LED lights green for normal
operation. It is red when the chassis determines that
the ambient temperature rises above the high
temperature threshold. The LED blinks when the
falling ambient temperature crosses the high
threshold to within five degrees of the high
threshold.