RADVision SCOPIA 400, User Manual

Page: 162 / 208

152 SCOPIA 400/1000 Gateway User Guide
Viewing Gateway Alarm Events
D
ISCONNECTING
C
ALLS
On the Calls tab, you can disconnect a currently active call or disconnect all
active calls.
Procedure
1
In the Gateway interface, on the sidebar, click Gateway (if not already
selected).
2
In the Calls tab, select a call and click Disconnect , or to disconnect all
calls, click Disconnect All Calls .
V
IEWING
G
ATEWAY
A
LARM
E
VENTS
In the Event Log tab, you can view a list of reported alarm events. The Event
Log tab displays the following information:
Event ID —Displays the identifier for the specified alarm event.
Type —Displays the type of event.
Time —Displays the time at which the reported event occurred.
Severity —Displays the severity of the reported event.
Message —Displays the error message used to report the event.
Total —Displays the total number of reported alarm events.
Clear All —Click to clear all events from the Event Log tab.
See Table 3-9 for a list of PRI Gateway SNMP events. See Table 3-10 for a list of
Serial Gateway SNMP events.
V
IEWING
G
ATEWAY
S
TATISTICS
In the Statistics tab, you can view system-specific information such as call traces
and debugging details. The Statistics tab displays the following:
Gateway start-up counter —Displays the number of times that the
Gateway has reset.
Details button—Click to display the Details window, which lists the last
three reasons for Gateway power failure.
ISDN LOF event counter (PRI Gateways only)—Displays the total
number of ISDN Loss of Frame (LoF) errors recorded on both Gateway
PRI ports.
CRC error/event counter on ISDN (PRI Gateways only)—Displays
the total number of CRC errors on the ISDN network recorded on both
Gateway PRI ports.