RADVision SCOPIA 400, User Manual

Page: 80 / 208

70 SCOPIA 400/1000 Gateway User Guide
Configuring Web Settings
C
ONFIGURING
W
EB
S
ETTINGS
On the Web tab, you can set the web server port and configure enhanced web
security settings.
This section describes the following topics:
Changing the Administrator Interface Web Server Port on page 70
Enabling HTTPS on page 70
Managing Digital Certificates on page 71
C
HANGING THE
A
DMINISTRATOR
I
NTERFACE
W
EB
S
ERVER
P
ORT
Port 80 is the default Administrator interface web server port. For additional
security, you can modify the web server port in the Web tab.
Procedure
1
In the Gateway interface, on the sidebar, click Board .
2
Click the Web tab.
3
In the Web server port field, enter the port number.
4
On the toolbar, click Upload .
E
NABLING
HTTPS
This section describes how to enable or disable Gateway HTTPS support.
Note
HTTPS support is enabled when a certificate is installed or a certificate is
self-signed.
Procedure
1
In the Gateway interface, on the sidebar, click Board .
2
Click the Web tab.
3
Check Support Secure Communications (HTTPS) to enable HTTPS
support. Uncheck it to disable HTTPS.
4
Click Upload .