RADVision SCOPIA 400, User Manual

Page: 116 / 208

106 SCOPIA 400/1000 Gateway User Guide
Configuring Gateway Settings
Call to peer
rejected - trying
alternate A call to a peer has been rejected and the
Gateway is searching for an alternate peer. Warning
Call to peer
rejected by all
listed peers A call to a peer has been rejected by all
listed peers. Major
Card extract/Hot
Swap A blade has been removed from the
RADVISION chassis under power or
inserted into the chassis under power, or the
when the Gateway enters maintenance
mode.
TRUE Critical
FALSE Clear
Configuration
changed A configuration change is uploaded from the
web interface. Information
Configuration
exported Configuration is exported via the web
interface. Information
Configuration
imported Configuration is imported via the web
interface. Information
Corrupt IVR
messages on host Corrupt IVR files are present in the
Gateway. Warning
Corrupt WEB
data Corrupt web files are present in the
Gateway. Major
Gatekeeper
registration state
change A change occurs in the registration status of
the Gateway. TRUE Clear
FALSE Minor
Incompatible sw
version install An attempt to burn a version of the Gateway
software onto incompatible hardware
occurs. Warning
Loss of Ethernet The network returns after going down.
Indicates the time at which the network was
restored. TRUE Critical
FALSE Clear
Table 3-10 Serial Gateway SNMP Trap Event Types (continued)
Event Type Trap is sent when ... State Severity