RADVision SCOPIA 400, User Manual

Page: 160 / 208

150 SCOPIA 400/1000 Gateway User Guide
Viewing Call Information
Table 3-28 Call Details Window Fields
Field Description
Start Displays the time at which the call began.
Duration Displays the length of time that the call has been in progress.
Bandwidth (Kbps) Displays the total bandwidth (in Kbps) used for this call on both
sides.
Source
Source Indicates whether the source endpoint of the call is located on an
ISDN (or serial) or IP network.
Number Displays the alias that identifies the source endpoint of the call.
B channels (not
available in
Gateway S40 SP) Displays the B channels currently in use for this call.
Resync B channels
(not available in
Gateway S40 SP) In mid-call, you can click this button to resynchronize B channels
in cases of poor call quality.
Use this option with extreme caution. Resynchronizing B channels
can cause a call to disconnect.
Encryption “Encryption: AES 128” displays when the call leg is encrypted.
Audio Displays the audio transcoding protocol and the bandwidth of the
voice calls in both directions between the source endpoint and the
Gateway.
Video Displays the video transcoding protocol, the frame format, and the
bandwidth of the video calls in both directions between the source
endpoint and the Gateway.
Note The Video 2 stream is active when dual video streams for a
single call are in use.
Data Displays the bandwidth of the data calls in both directions between
the source endpoint and the Gateway.