RADVision SCOPIA 400, User Manual

Page: 76 / 208

66 SCOPIA 400/1000 Gateway User Guide
Viewing General Information About the Gateway
S
ETTING THE
T
IME
AND
D
ATE ON THE
G
ATEWAY
You use the Basics tab to choose how your Gateway tracks the date and time.
Procedure
1
On the sidebar, click Board .
2
Click the Basics tab.
3
Locate the Date/Time field and click Change .
The Change Time dialog box appears. The date and time the Gateway
reports appear in the Set time to field.
4
In the Change field, select the unit of time that you want to change.
Note There is no unit to change AM and PM. This designation rolls
automatically when the hour rolls past 12 backward or forward. Similarly,
seconds roll minutes, minutes roll hours, hours roll days, and days roll
months.
5
In the Set time to field, choose the up or down arrow to change that unit.
The unit you choose changes in the direction you choose: higher (up) or
lower (down).
6
Repeat step 4 and 5 for as many units as you want to change.
7
On the toolbar, click Upload .